A feature extraction method of rub-impact based on adaptive stochastic resonance and Hjorth parameter

The characteristic frequency of a rub-impact fault is usually very complex and may contain higher harmonics and subharmonics. Due to the uncertainty of harmonic components and the complexity of signal-to-noise ratio (SNR) operation, the general scale transformation stochastic resonance (GSTSR) has certain limitations in the identification of rub-impact faults. To solve this problem, the paper starts with complexity and proposes a rub-impact fault identification method combining a swarm intelligence optimized algorithm (SIOA) with Hjorth parameters and GSTSR. The complexity of vibration signals will change greatly before and after rub-impact faults. The complexity parameter in Hjorth parameters can effectively embody the complexity of signals and is invulnerable to noise interference. Therefore, the complexity parameter in the Hjorth parameters is taken as the objective function of SIOA and combined with GSTSR. Vibration signals from cases are taken as input to adaptive stochastic resonant (ASR) systems, and the system parameters are adaptively and synchronously adjusted to realize the maximal resonant effect. Finally, the spectrum analysis of signals obtained from ASR is used to extract failure features and recognize faults in the rotor–stator rub-impact. The proposed method is verified by comparing it with other schemes under different SIOAs and different operating conditions. The result of the comparison shows that the complexity parameter of the Hjorth parameters can be taken as the objective function of SIOA to accurately identify the rub-impact fault. Meanwhile, the proposed method, compared with the method of taking SNR as an objective function, has a better effect on reducing time costs and strengthening fault characteristics.