This paper presents an optimization method that aims to mitigate disturbances in the radial-feed system of the ring-pendulum double-sided polisher (RDP) during processing. We built a radial-feed system model of an RDP and developed a single-tube robust model predictive control system to enhance the disturbance rejection capability of the radial-feed system. To constrain the system states inside the terminal constraint set and further enhance the system’s robustness, we added the ε-approximation to approach the single-tube terminal constraint set. Finally, the effectiveness of the proposed method for the RDP radial-feed system was verified through simulations and experiments. These findings demonstrate the potential of the proposed method for improving the performance of the RDP radial-feed system in practical applications. The polish processing results demonstrated a substantial improvement in the accuracy of the surface shape measurements obtained by applying the STRMPC method. Compared to the MPC method, the PV value decreased from 1.49 λ PV to 0.99 λ PV, indicating an improvement in the convergence rate of approximately 9.78%. Additionally, the RMS value decreased from 0.257 λ RMS to 0.163 λ RMS, demonstrating a remarkable 35.6% enhancement in the convergence rate.

More from our Archive

• DOI: 10.3390/app13148275 2023

  A Brief Review of Machine Learning Algorithms in Forest Fires Science

  Ramez Alkhatib, Wahib Sahwan, Anas Alkhatieb, Brigitta Schütt

• DOI: 10.3390/app13137783 2023

  Identification of Subsurface Mesoscale Crack in Full Ceramic Ball Bearings Based on Strain Energy Theory

  Xiaotian Bai, Zhaonan Zhang, Huaitao Shi, Zhong Luo, Tao Li

• DOI: 10.3390/app13148122 2023

  A Survey on Formal Verification and Validation Techniques for Internet of Things

  Moez Krichen

• DOI: 10.1063/5.0153716 2023

  Peristaltic transport of MHD Ree–Eyring fluid through a flexible channel under the influence of activation energy

  M. Ajithkumar, P. Lakshminarayana, K. Vajravelu

• DOI: 10.3390/app13137744 2023

  New Trends in 4D Printing: A Critical Review

  Somayeh Vatanparast, Alberto Boschetto, Luana Bottini, Paolo Gaudenzi

• DOI: 10.3390/app13148175 2023

  Boiling vs. Microwave Heating—The Impact on Physicochemical Characteristics of Bell Pepper (Capsicum annuum L.) at Different Ripening Stages

  Remigiusz Olędzki, Joanna Harasym

• DOI: 10.1063/5.0158292 2023

  On the propagation of cnoidal wave and overtaking collision of slow shear Alfvén solitons in low <b> <i>β</i> </b> magnetized plasmas

  Salemah A. Almutlak, Shahida Parveen, Shahzad Mahmood, Anisa Qamar, B. M. Alotaibi, S. A. El-Tantawy

• DOI: 10.1063/5.0156571 2023

  Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset

  Mohammad-Reza Pendar, Sílvio Cândido, José Carlos Páscoa

• DOI: 10.1063/5.0156543 2023

  Assessment of the aerodynamic benefits of collocating horizontal- and vertical-axis wind turbines in tandem using actuator line model

  Yixiao Shao, Jie Su, Yu Tu, Limin Kuang, Zhaolong Han, Kai Zhang, Dai Zhou

• DOI: 10.1063/5.0155532 2023

  Couple stress fluid flow enclosing a solid sphere in a porous medium: Effect of magnetic field

  Pankaj Kumar Maurya, Satya Deo, Deepak Kumar Maurya