Accurate low-energy pulse system for intravascular lithotripsy

In response to biomedical imperatives, a novel approach is presented for the endovascular management of atherosclerosis. This approach is grounded in the electrohydraulic effect of a precisely controlled low-energy pulse discharge system, coupled with sequential control within the incomplete discharge electrode, to generate shockwaves aimed at softening blood vessels and rupturing calcified plaques. Theoretical analysis encompassed circuit design, control timing, and operational processes, while experimental investigations demonstrated precise control of non-oscillation and incomplete discharge by adjusting key parameters. Utilizing a 3 kV DC high-voltage power supply, a 220 nF capacitor, and two sets of 3.3 Ω resistors in parallel, with pin–plate electrodes as the load for discharge in normal saline, resulted in a 1 kV reduction in voltage across the capacitor and a peak current of 170 A. Energy release occurred through non-oscillatory and incomplete discharge, effectively generating shockwaves with peak pressures of 5–10 MPa at distances of 1–2 mm from the discharge center to treat calcified lesions. Compared with the existing intravascular lithotripsy devices, the shockwave system realizes accurate control of discharge energy by adjusting the turn-off time of incomplete discharge so as to realize accurate control of shockwave energy. Doctors can choose different intensities of shockwaves according to different degrees of calcification in the treatment process so as to minimize the discomfort caused by shockwaves and improve safety. Valuable insights are provided for intravascular lithotripsy devices in engineering.