Mechanical compaction is often used to densify building earth blocks by reducing the void between the particles. Compacted stabilised earth involves a binder, which holds the particles of the materials together. The compaction and addition of binders to the earth can modify its transport, mechanical, and acoustical properties. In this study, the acoustic transmission coefficient, porosity, and airflow resistivity were investigated by varying the concentrations of water hyacinth ash (WHA) and sugarcane bagasse ash (SBA) binders. An acoustic test rig comprising an acoustic wave guide made from joined water pipes was employed to analyse the influence of the WHA and SBA binders on the acoustical performance of the earth blocks. It was found out that the measured acoustic wave transmission was sensitive to the variation in the composition of WHA and SBA in the earth blocks. Increasing the WHA concentration led to an increase in the acoustic transmission coefficient and porosity, but reduced the airflow resistivity of the compressed earth blocks; while increasing the SBA reduced the transmission coefficient and porosity, but increased the airflow resistivity. This shows that SBA has a stronger binding property than WHA, which is ideal for the manufacture of stronger earth blocks, while the higher porosity of the earth blocks obtained with WHA is good for the construction of porous walls, which is good for maintaining the airflow between the inside of buildings and the surrounding.

More from our Archive

• DOI: 10.3390/app13148275 2023

  A Brief Review of Machine Learning Algorithms in Forest Fires Science

  Ramez Alkhatib, Wahib Sahwan, Anas Alkhatieb, Brigitta Schütt

• DOI: 10.3390/app13137783 2023

  Identification of Subsurface Mesoscale Crack in Full Ceramic Ball Bearings Based on Strain Energy Theory

  Xiaotian Bai, Zhaonan Zhang, Huaitao Shi, Zhong Luo, Tao Li

• DOI: 10.3390/app13148122 2023

  A Survey on Formal Verification and Validation Techniques for Internet of Things

  Moez Krichen

• DOI: 10.1063/5.0153716 2023

  Peristaltic transport of MHD Ree–Eyring fluid through a flexible channel under the influence of activation energy

  M. Ajithkumar, P. Lakshminarayana, K. Vajravelu

• DOI: 10.3390/app13137744 2023

  New Trends in 4D Printing: A Critical Review

  Somayeh Vatanparast, Alberto Boschetto, Luana Bottini, Paolo Gaudenzi

• DOI: 10.3390/app13148175 2023

  Boiling vs. Microwave Heating—The Impact on Physicochemical Characteristics of Bell Pepper (Capsicum annuum L.) at Different Ripening Stages

  Remigiusz Olędzki, Joanna Harasym

• DOI: 10.1063/5.0158292 2023

  On the propagation of cnoidal wave and overtaking collision of slow shear Alfvén solitons in low <b> <i>β</i> </b> magnetized plasmas

  Salemah A. Almutlak, Shahida Parveen, Shahzad Mahmood, Anisa Qamar, B. M. Alotaibi, S. A. El-Tantawy

• DOI: 10.1063/5.0156571 2023

  Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset

  Mohammad-Reza Pendar, Sílvio Cândido, José Carlos Páscoa

• DOI: 10.1063/5.0156543 2023

  Assessment of the aerodynamic benefits of collocating horizontal- and vertical-axis wind turbines in tandem using actuator line model

  Yixiao Shao, Jie Su, Yu Tu, Limin Kuang, Zhaolong Han, Kai Zhang, Dai Zhou

• DOI: 10.1063/5.0155532 2023

  Couple stress fluid flow enclosing a solid sphere in a porous medium: Effect of magnetic field

  Pankaj Kumar Maurya, Satya Deo, Deepak Kumar Maurya