Comparison in microstructure, mechanical properties, and fatigue behavior of 9Cr3W3Co turbine rotor steel and its welded joint
Jianning Mai, Fulin Liu, Yao Chen, Chao He, Linsen Wang, Zhengbin Zhong, Wei Zhang, Hong Zhang, Chong Wang, Qingyuan Wang, Yongjie Liu- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
Abstract
The microstructure, mechanical properties, and high/very‐high cycle fatigue behaviors of 9Cr3W3Co turbine rotor steel and its welded joint were investigated. The welded nugget zone (WNZ) exhibited the highest microhardness value, followed by the heat‐affected zone (HAZ), while the base material (BM) showed the lowest hardness value. The WNZ exhibited a higher yield strength compared to the BM with reduced elongation, while maintaining similar ultimate tensile strength. The fatigue strength of the BM at 5 × 107 cycles is roughly 53.7% of the yield strength, whereas that of the WNZ increases to approximately 55.0%. In comparison to the fatigue strength of the BM at 5 × 107 cycles, the WNZ exhibits a notable increase of 10.5%. Smaller grain size and higher dislocation density were observed in the WNZ, which contributed to improved microhardness, yield strength, and fatigue resistance through grain boundary strengthening and dislocation hardening.