Yali Gao, Pengyong Lu, Sicheng Bai, Baolong Qin, Dongdong Zhang

Influence of Laser Power on Microstructure and Properties of Al-Si+Y2O3 Coating

  • Materials Chemistry
  • Surfaces, Coatings and Films
  • Surfaces and Interfaces
Save to CiteDrive Show PDF

Al-Si/7.5 wt.%Y2O3 coatings were prepared on Mg alloy with laser cladding to enhance the wear and corrosion resistance of substrate. The influence of laser power on the microstructure and properties of the coating were discussed. The results uncovered that the coatings consisted primarily of Mg2Si, Mg17Al12, Mg2Al3, Al4MgY, and α-Mg phases. Through calculating, it was observed that the crystal size decreased with the decrease in the laser power. Y2O3 gave the coating a better strengthening effect due to the fine-grain strengthening and hard-phase strengthening. The average hardness of the coating with laser power of 1100 W achieved 312 HV, which was approximately 4.2 times that of the substrate. The wear volume of the coating was 22.2% that of the substrate. Compared with Mg alloy, the self-corrosion potential of the coating increased by 1.09 V, and the self-corrosion current density decreased by three orders of magnitude.

Need a simple solution for managing your BibTeX entries? Explore CiteDrive!

  • Web-based, modern reference management
  • Collaborate and share with fellow researchers
  • Integration with Overleaf
  • Comprehensive BibTeX/BibLaTeX support
  • Save articles and websites directly from your browser
  • Search for new articles from a database of tens of millions of references
Try out CiteDrive

More from our Archive