Mechanical Properties of Furniture Joints Using Loose Tenons and Connectors

The investigation conducted in this study focused on assessing the withdrawal resistance of T-joints and the bending moment capacity in the tension and compression of corner joints. For samples, preparation glued-in loose tenons (Domino dowels) and dismountable connectors were used as connecting elements. The joints were made of European beech wood and a D3-grade PVAc adhesive was utilized for bonding. The effect of the joint type, the shoulders’ bonding, and the load application direction were investigated. The test results revealed that the withdrawal resistance of Domino dowel joints exhibited twice the strength compared to Domino connectors. Moreover, the presence of a bonded area on the shoulders did not significantly impact the strength of the joints. In the case of corner joints, the bending moment capacity in compression was notably influenced by the bond line on the shoulders, although such an effect was not significant in tension. Domino dowel joints provided a robust and reliable permanent connection between wooden elements, surpassing Domino connectors; however, in both cases, the strength values exceeded those of conventional dowels and cam lock connector joints.